Crosby Cold Tuff S-505 Steel Swaging Sleeve 5/16" 1041090 Flemish Eye

Description

New
5/16" CROSBY SWAGING SLEEVE S-505 - FLEMISH EYE - 1041090
CROSBY S-505 FLEMISH EYE SWAGE SLEEVE For Flemish eye wire rope splicing. Designed for low temperature toughness. Resists cracking when swaged (equals or exceeds stainless steel sleeves). Special processed low carbon steel. COLD TUFF for better swageability. Can be stamped for identification after swaging without concern for fractures when following these directions. Use round corner stamps to a maximum depth of 0.015 in. (1/64). The area for stamping should be on the side of the sleeve in the plane of the sling eye, and no less than 0.250 in. (1/4) from either end of the sleeve. ** NOTE: S-505 Standard Sleeves are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope.
For Flemish eye wire rope splicing.
• Designed for low temperature toughness.
• Resists cracking when swaged (equals or exceeds stainless
steel sleeves).
• Special processed low carbon steel.
• “COLD TUFF”® for better swageability.
• Can be stamped for identification after swaging without concern
for fractures when following these directions.
• Use round corner stamps to a maximum depth of 0.015 in.
(1/64). The area for stamping should be on the side of the
sleeve in the plane of the sling eye, and no less than 0.250
in. (1/4) from either end of the sleeve.
• Standard Steel Sleeve terminations have efficiency ratings as
follows based on the catalog strength of wire rope.
Designed for low temperature toughness
Resists cracking when swaged (equals or exceeds stainless steel sleeves)
Special processed low carbon steel
COLD TUFF® for better swageability
Can be stamped for identification after swaging without concern for fractures
Use round corner stamps to a maximum depth of 1/64 in
The area for stamping should be on the side of the sleeve in the plane of the sling eye, and no less than 1/4 in from either end of the sleeve
For flemish eye wire rope splicing
SPECS
More Information
Manufacturer Part Number
1041090
Manufacturer
Crosby Group
Brand Name
NATIONAL
UPC
662547088165
Wire Rope Diameter
5/16 in
Series
S-505
Standard Approvals
EN 13411-3:2004
ASME HST-4, Class H
CMAA 70 Class D
FEM9.511 Class 2m
ISO 4301.1 Class M5
US Patent 7,255,330
Type
Standard
Material
Low Carbon Steel
Package Quantity
1/Each